LED Strip for RGB Flexible Lighting

The LED strip is non-waterproof, with an IP30 protection rating. To operate the WS2812 LED strip, a DC5V power supply (not included) and a WS2812 LED controller (also not included) are required. The product includes a 3-pin JST connector, where the red wire is for VCC, the white wire is for GND, and the green wire is for DATA.

The strip has 3M adhesive tape on the back, except for the IP67 variant, which does not include the adhesive tape. The installation surface must be smooth, clean, and dry for the adhesive to adhere properly. The LED strip can be cut between each LED to create custom lengths as desired.

It is important to avoid bending the strip sharply, as this may damage the internal components. For longer runs, it is recommended to power the strip from both ends to reduce voltage drop. The 3-pin JST connector wire is 20AWG in thickness.

The product details are as follows: - Power: 30 LEDs per meter, 9 watts per meter - LED Resource: WS2812 LEDs (5050 SMD RGB LEDs with a built-in improved version of the WS2811 IC) - IC Type: Improved version of the WS2812 IC, built into the 5050 RGB LED - Pixels: 30 per meter - Pitch: 16.6mm (1000/64) - Grayscale: 256 bits per color, 8 bits per color - FPC Width: 10mm - FPC Color: White - Protection Rate: IP30 - Colors: Full color RGB, dream color changing

The package includes a 5-meter WS2812 LED strip with 5050 RGB WS2812 LEDs, packaged in an anti-static bag. The IP30 variant comes with 3M adhesive tape on the back, while the IP67 variant does not include the adhesive tape.

product information: